English

PRODUCTS

Home

Products

Medium Voltage Power Cables

American Standard MV Cables

AEIC CS8-07 MV 105 5kV Cable Copper / Aluminum 3 Conductor

Send Email to Us

DOWNLOAD CATEGORY SPECIFICATIONS

Product Details

Product parameter

Application

MV 105 5kV Cable offers an economical, rugged and reliable alternative to labor-intensive cable in conduit wiring methods.
Installed on metal racks, troughs, in raceways, in cable trays or secured to supports spaced not more than six feet apart.
MV 105 5kV Cable Installed in both exposed and concealed work, wet or dry locations, directly buried.

Construction

Conductor:
Class B copper conductor as per ASTM B3.
Or Class A or B aluminum alloy 1350 conductor as per ASTM B231. Stranded conductors are water-blocked with conductor filling compound.

Conductor Shield:
Extruded thermosetting semiconducting shield

Insulation:
Extruded TRXLPE as defined in ANSI/ICEA S-94-649

Insulation Shield:
Extruded thermosetting semiconducting shield

Metallic Shield:
The metallic shield is flat uncoated 5-mil thick copper tape helically applied with minimum 20% overlap. A Mylar ribbon is longitudinally applied under the copper tape shield for phase identification - 1C w/Red, 1C w/Blue, and 1C w/None.

Grounding Conductors:
Three bare stranded copper conductor.

Fillers:
Non hygroscopic fillers.

Binder Tape:
Poly glass tape.

Jacket:
Black, sunlight resistant, flame retardant PVC jacket tightly applied over the binder tape.

AEIC-CS8-07-5kV-MV-105-Cable-Copper-Aluminum-3-Conductor-(2)

1.Conductor(CU)
2.Conductor Shield
3.Insulation
4.Insulation Shield
5.Metallic Shield

6.Grounding Conductors
7.Fillers
8.Binder Tape
9.Jacket

AEIC-CS8-07-5kV-MV-105-Cable-Copper-Aluminum-3-Conductor-(3)

1.Conductor(AL)
2.Conductor Shield
3.Insulation
4.Insulation Shield
5.Metallic Shield

6.Grounding Conductors
7.Fillers
8.Binder Tape
9.Jacket

Cable Marking and Packing Materials

Cable Marking:
printing, embossing ,engraving

Packing Materials:
wooden drum, steel drum, steel-wooden drum

Standards

- AEIC CS8, Specifications for Shielded Power Cable, 5-46kV
- ICEA S-93-639, 5-46 kV Shielded Power Cable
- ICEA S-97-682, Utility Shielded Power Cable Rated 5-46 kV
- UL 1072 MV-105
- IEEE- IEEE 383 Flame Test
- For 105°C continuous, 140°C emergency, 250°C short-circuit operation.
- CSA Standard C68.5-07 File # 257759 Primary Shielded and Concentric Neutral Cable for Distribution

CU 100% MV 105 5kV Cable Specification

Size	Insulation Thickness	No. of Ground Wires	Size of Ground Wires	Conductor Diameter	Insulation Diameter	Insulation Shield Diameter	Overall Jacket Diameter	Approximate Weight	Minimum Bending Radius	Ampacity 90ºC in Duct	Ampacity 90ºC in Air
AWG or KCMIL	mils	No.	mils	in	in	in	in	lb/MFT	in	Amps	Amps
4	90	3	10	0.226	0.45	0.51	1.32	1097	10	100	105
2	90	3	10	0.284	0.51	0.57	1.44	1412	11	135	140
1	90	3	8	0.324	0.55	0.61	1.53	1682	11	155	160
1/0	90	3	8	0.364	0.59	0.65	1.61	1948	12	175	185
2/0	90	3	8	0.408	0.64	0.69	1.71	2271	12	200	215
3/0	90	3	7	0.458	0.69	0.74	1.88	2812	14	230	250
4/0	90	3	7	0.515	0.74	0.8	2	3317	15	265	285
250	90	3	7	0.561	0.8	0.85	2.11	3761	15	290	320
350	90	3	6	0.664	0.9	0.95	2.34	4918	17	355	395
500	90	3	5	0.794	1.03	1.1	2.65	6668	19	430	485
750	90	3	4	0.974	1.22	1.29	3.12	9629	22	530	615
1000	90	3	4	1.124	1.37	1.44	3.44	12287	25	600	705

CU 133% MV 105 5kV Cable Specification

Size	Insulation Thickness	No. of Ground Wires	Size of Ground Wires	Conductor Diameter	Insulation Diameter	Insulation Shield Diameter	Overall Jacket Diameter	Approximate Weight	Minimum Bending Radius	Ampacity 90ºC in Duct	Ampacity 90ºC in Air
AWG or KCMIL	mils	No.	mils	in	in	in	in	lb/MFT	in	Amps	Amps
4	115	3	10	0.226	0.5	0.56	1.42	1193	10	100	105
2	115	3	10	0.284	0.56	0.62	1.55	1515	11	135	140
1	115	3	8	0.324	0.6	0.66	1.64	1789	12	155	160
1/0	115	3	8	0.364	0.64	0.7	1.78	2158	13	175	185
2/0	115	3	8	0.408	0.69	0.74	1.88	2493	14	200	215
3/0	115	3	7	0.458	0.74	0.79	1.99	2941	14	230	250
4/0	115	3	7	0.515	0.79	0.85	2.11	3453	15	265	285
250	115	3	7	0.561	0.85	0.9	2.22	3903	16	290	320
350	115	3	6	0.664	0.95	1	2.44	5072	18	355	395
500	115	3	5	0.794	1.08	1.15	2.76	6839	20	430	485
750	115	3	4	0.974	1.27	1.34	3.22	9829	23	530	615
1000	115	3	4	1.124	1.42	1.49	3.55	12504	25	600	705

AL 100% MV 105 5kV Cable Specification

Size	Insulation Thickness	No. of Ground Wires	Size of Ground Wires	Conductor Diameter	Insulation Diameter	Insulation Shield Diameter	Overall Jacket Diameter	Approximate Weight	Minimum Bending Radius	Ampacity 90ºC in Duct	Ampacity 90ºC in Air
AWG or KCMIL	mils	No.	mils	in	in	in	in	lb/MFT	in	Amps	Amps
4	90	3	10	0.226	0.45	0.51	1.32	833	10	80	81
2	90	3	10	0.284	0.51	0.57	1.44	993	11	105	110
1	90	3	10	0.324	0.55	0.61	1.53	1093	11	120	125
1/0	90	3	10	0.364	0.59	0.65	1.61	1218	12	140	145
2/0	90	3	8	0.408	0.64	0.69	1.77	1522	13	160	170
3/0	90	3	8	0.458	0.69	0.74	1.88	1705	14	180	195
4/0	90	3	8	0.515	0.74	0.8	2	1930	15	205	225
250	90	3	8	0.561	0.8	0.85	2.11	2131	15	230	250
350	90	3	7	0.664	0.9	0.95	2.34	2643	17	280	310
500	90	3	6	0.794	1.03	1.1	2.65	3424	19	340	385
750	90	3	5	0.974	1.22	1.29	3.12	4755	22	425	495
1000	90	3	4	1.124	1.37	1.44	3.44	5886	25	495	585

AL 133% MV 105 5kV Cable Specification

Size	Insulation Thickness	No. of Ground Wires	Size of Ground Wires	Conductor Diameter	Insulation Diameter	Insulation Shield Diameter	Overall Jacket Diameter	Approximate Weight	Minimum Bending Radius	Ampacity 90ºC in Duct	Ampacity 90ºC in Air
AWG or KCMIL	mils	No.	mils	in	in	in	in	lb/MFT	in	Amps	Amps
4	115	3	10	0.226	0.5	0.56	1.42	929	10	80	81
2	115	3	10	0.284	0.56	0.62	1.55	1095	11	105	110
1	115	3	10	0.324	0.6	0.66	1.64	1200	12	120	125
1/0	115	3	10	0.364	0.64	0.7	1.78	1429	13	140	145
2/0	115	3	8	0.408	0.69	0.74	1.88	1645	14	160	170
3/0	115	3	8	0.458	0.74	0.79	1.99	1834	14	180	195
4/0	115	3	8	0.515	0.79	0.85	2.11	2066	15	205	225
250	115	3	8	0.561	0.85	0.9	2.22	2273	16	230	250
350	115	3	7	0.664	0.95	1	2.44	2797	18	280	310
500	115	3	6	0.794	1.08	1.15	2.76	3595	20	340	385
750	115	3	5	0.974	1.27	1.34	3.22	4955	23	425	495
1000	115	3	4	1.124	1.42	1.49	3.55	6103	25	495	585